IgPS Features and benefits

IgPS Frame

A substantial fully welded steel frame is at the core of each IgPS frame.
It is this steel frame that directly bears the huge loads demanded by legislation:

  • Wall hung WC pan EN997 400kg (approx 63 stone).
  • Wall hung washbasin EN14668 150kg (approx 24 stone).

IgPS is independently tested far in excess of these minimum standards.
This gives the specifier/ installer complete peace of mind in meeting this legislation.

Unlike similar systems IgPS has the sanitary ware bolted directly to the steel frame and does not rely on the panel/clip assembly for its strength.
This gives high strength and fit-and-forget reliability.

IgPS frames are limited in size to a standard 1200mm x 500mm module.
This allows safe manual handling by 1 person and transportation on standard pallets.

Base IgPS units are configured to accept sanitary ware and be capped off at shelf height. Alternatively, top IgPS frames can be used to extend the system to ceiling height.

IgPS Wall fixing

The IgPS frame is tied back to wall with M10 studding and a top hat bracket.
This gives high strength and full adjustability for the installer.

The rigidity of the IgPS frame reduces the number of fixings necessary.
Installation is easier and quicker.

The rigidity of the IgPS unit allows the fixings in the standard top frame to be kept low.
This allows the installer to be stood safely on the ground.

IgPS Flashgaps

With standard width IgPS frames, it is the flashgap that provides the adjustability to suit range widths. Flashgap strips are supplied in oversize lengths to suit the project.
Flashgap strip are easily adjustable on site to take up any tolerances.

IgPS technical drawing
IgPS technical drawing

IgPS Panels

A full range of panel options is available to suit all specifications, budgets and demands:

19mm moisture resistant melamine faced chipboard (MR MFC).
For light duty, dry, economy use.

17mm moisture resistant chipboard faced either side with high pressure laminate.
For heavy duty, dry, design led use.

12.5mm compact solid grade laminate (SGL).
For heavy duty, wet, functional use.

With the high strength IgPS frame taking the sanitary ware load and not the panel and clip arrangement, non-standard design led panel materials can be used.
These include:
Glass.
Solid surface (Corian).
Other bespoke surfaces on request.

Mounted on high strength nylon clips and brackets each panel section is fully demountable.
This provides full access to all concealed services.

All servicing of WC, washbasin and waterless/rim flush urinals can be made through bottom or middle panels.
No need to remove large top access panel for servicing – though this can be removed if needed.

Sanitary ware

Wall hung WCs are the specifier’s choice. Easy to clean, space enhancing and modern, IgPS is particularly designed to cater for wall hung WCs:

  • Simple and convenient to install.
  • Strong, with independent test certification.
  • Complete with full access for service.

These features also extend the same benefits to:

  • Cantilevered vanity tops.
  • Wall hung washbasins.
  • Urinals and urinal dividers.
  • Plain panel systems for concealing services and plant.